How to get the pellets to burn well

Biomass pellet fuel is an environmentally friendly and energy-saving fuel processed from wood chips and shavings using wood pellets. It is a relatively clean and less polluting fuel. If this fuel burns completely, the economic benefits are enormous. However, the biomass pellet fuel is not fully burned, how to deal with it? The wood pellet machine manufacturer tells you!

1.The furnace temperature is sufficient

The full combustion of biomass pellet fuel first requires high furnace temperature, which can meet the needs of full combustion of the fuel. The combustion speed should be proportional to the temperature to ensure that the furnace does not slag and increase the furnace temperature as much as possible.

2, the right amount of air

If the amount of air is too large, the temperature of the furnace will drop and the fuel will not burn completely. If the amount of air is insufficient, combustion efficiency decreases, ie fuel is wasted and smoke emissions increase.

2. Thoroughly mix fuel and air

During the combustion stage of biomass pellet fuel, it is necessary to ensure adequate mixing of air and fuel, and in the burnout stage, the disturbance should be strengthened. Ensure that the fuel stays in the grate and the furnace for a long time, so that the combustion is more complete, the combustion efficiency is improved, and the cost is saved.

Have you learned the above three methods? If you have any questions about biomass pellet fuel and wood pellet machine, you can consult our wood pellet machine manufacturer